Printing & Packaging Industry – Industrial Safety Encyclopedia

🏭

Section A

Industry Profile

▼

Description

Gujarat's printing and packaging industry serves FMCG, pharmaceutical, textile, and export packaging needs, ranging from large integrated packaging plants to small offset print shops. The sector presents a mix of solvent fire hazards (flexo and gravure inks), ink mist inhalation, noise from high-speed presses, ergonomic issues from roll handling, and chemical exposures from UV inks, adhesives, and cleaning solvents. While individual hazard intensities may be lower than process industries, the combination and the prevalence of small units with limited safety management makes this a significant sector for DISH attention.

📸Process Area / Plant Overview

📸Key Equipment / Machinery

📸Control Room / Lab

📸Packing / Dispatch

Manufacturing Process

#	Process Stage	Equipment Used	Key Hazard
1	Pre-Press / Platemaking	CTP (Computer-to-Plate), film output, plate processing	UV radiation, developer chemicals, solvent
2	Offset Printing	Sheet-fed or web offset press (500–15,000 sheets/hr)	Ink mist, IPA dampening, noise, nip points, roller
3	Flexographic Printing	Web flexo press (100–400 m/min) — solvent or water ink	Solvent vapour — fire; ink mist; speed-related injury
4	Gravure Printing	Rotogravure press (200–400 m/min) — solvent ink (toluene)	High solvent vapour (toluene) — fire and toxic; speed
5	Screen Printing	Manual/semi-auto screen press	Solvent ink; UV ink; ergonomic — squeegee operation
6	Digital Printing (Inkjet/Laser)	Wide format inkjet, laser printer	UV ink (carcinogen risk), ozone from laser, toner
7	Lamination	Thermal lamination, solvent-based dry lamination	Solvent vapour, heat, nip at laminating roller
8	Die Cutting / Creasing	Platen die cutter, rotary die cutter	Hand in die — cut/crush; noise; waste ejection
9	Gluing / Folding-Gluing	Gluing machine (hot melt or cold glue), folder-gluer	Hot melt burn (180°C), nip at fold rollers
10	Finishing (Varnishing, Foiling, Embossing)	UV varnish coater, hot stamping foil machine	UV exposure, hot die, solvent varnish fire

Raw Materials

Substrates: paper, board, PP/PET/PE films, aluminium foilPrinting inks: offset (low-VOC or UV-curable), flexo (water or solvent), gravure (toluene-based)Solvents: IPA (offset dampening), Ethyl acetate, Toluene, MEK (flexo/gravure cleaning)Plates and chemicals: PS plate developer (sodium silicate), CTP chemistryAdhesives: hot melt EVA, solvent-based lamination adhesive, water-based PVAUV inks and varnishes: photoinitiators — skin/eye sensitisers, possible carcinogensFountain solution: IPA + water + additives (pH modifiers, biocides)

Finished Products

Folding cartons (pharmaceutical, FMCG, food packaging)
Flexible packaging (laminated pouches, sachets, films)
Labels (pressure-sensitive, heat-shrink, wet glue)
Corrugated boxes and cartons
Printed PET / BOPP films for packaging
Commercial print (brochures, calendars, books)
Security print (government documents — specialty)

Typical Workforce

Category	Typical Strength	Exposure Risk
Offset Press Operators	20–100	MEDIUM–HIGH – ink mist, IPA, noise, nip
Flexo/Gravure Press Operators	10–40	HIGH – solvent vapour, speed, fire
Pre-Press Operators	5–20	MEDIUM – UV, chemical, ergonomic
Lamination/Finishing Operators	15–50	MEDIUM – heat, solvent, nip, ergonomic
Die Cutting Operators	10–40	HIGH – hand injury, noise
Maintenance	8–20	HIGH – electrical, LOTO on press
Packing & Dispatch	10–40	LOW–MEDIUM – ergonomic, manual handling

Utilities Used

Electrical: 3-phase 415V; large web press drives 50–200 kW; UV lamp systems 20–80 kW
Compressed air: 6–8 bar for press pneumatics, ink supply, cleaning
Solvent recovery: distillation unit for gravure solvent (toluene) recovery — mandatory under GPCB
UV curing: UV lamps (high-pressure mercury, LED UV) for UV ink/varnish curing — UV-C/UV-B hazard
Solvent storage: ethyl acetate, toluene, MEK — PESO licence if petroleum class
ETP: ink wash water, solvent-contaminated cleaning effluent — GPCB consent required

⚠️

Section B

Hazard Identification

▼

⚙️

Mechanical

⚡

Electrical

🔥

Fire

💥

Explosion

🧪

Chemical

☠️

Toxic

🦾

Ergonomic

🫁

Occ. Health

B1 – Mechanical Hazards

Offset press: impression/transfer cylinder nip — sheet feed operator hand or cloth — instant crush or drag-in
Flexo/gravure press: web threading at speed (300 m/min) — operator hand in nip while threading
Die cutter (platen): hand in cutting zone during makeready — severe laceration or amputation
Folder-gluer: paper jam clearing with machine running — hand in fold nip
Hot melt glue gun: burns at 180°C from nozzle drip; glue gun pressure system
Slitting/rewinding: blade contact during core change or blade adjustment
Large roll handling: 300–1000 kg substrate rolls — crush if roll falls during loading

B2 – Electrical Hazards

UV lamp system: 20–80 kW UV lamps — electrical + UV radiation hazard; mercury vapour in conventional UV lamps if broken
Variable frequency drives on web presses: induced leakage; high-frequency earth current
Gravure press: solvent atmosphere — Zone 2; non-FLP motors = ignition source
Static on printed plastic film: electrostatic charge up to 30 kV on film surfaces — discharge shock

B3 – Fire Hazards

Gravure press: toluene-based inks (flash point 4°C) — vapour throughout press room if ventilation inadequate
Flexo press: ethyl acetate inks (flash point −4°C) — extremely low flash point
IPA (offset dampening): flash point 12°C — fire if open container near press
Hot melt glue: fire if reservoir overheats or pump fails
UV ink: oxidising photoinitiators — fire if UV lamp malfunction causes thermal runaway in ink

B4 – Explosion Hazards

Gravure press room: toluene vapour + LEL breach — vapour cloud explosion; dryer section — paper + solvent inside dryer = enclosed explosion
Solvent storage: vapour release from solvent drum — stock room explosion
Solvent cleaning rags: spontaneous combustion in closed bins
Flexo dryer: solvent vapour in web dryer — LEL monitor required

B5 – Chemical Hazards

Toluene (gravure inks): OEL 50 ppm; reproductive toxin (Category 2); narcotic; liver damage — India's gravure printers among highest-exposed toluene workers
IPA vapour (offset): OEL 200 ppm; narcotic; flammable
UV photoinitiators (UV inks/varnishes): skin sensitisers, eye irritants; some are mutagenic
Benzophenone (UV ink photoinitiator): IARC Group 2B carcinogen — detected in food packaging migration — worker exposure also relevant
Isopropyl thioxanthone (ITX): reproductive toxin — present in some UV inks
Pigments in inks: heavy metal pigments in older formulations; phthalocyanine, azo pigments — skin sensitisers

B6 – Toxic / Biological Hazards

Toluene: reproductive toxicity (Category 2 — avoid in women of childbearing age); CNS narcosis; solvent encephalopathy; hepatotoxic
Benzene: if present as impurity in toluene (<1% specification must be verified) — IARC Group 1 leukemia
Ozone (from UV lamps and laser printers): TLV 0.1 ppm; pulmonary irritant at 0.2 ppm; strong oxidiser
Mercury vapour from broken conventional UV lamps: CNS toxin; kidney damage
Ink mist from high-speed offset: fine droplet inhalation — respiratory irritation

B7 – Ergonomic Hazards

Roll loading onto press: 300–1000 kg rolls — mechanical handling essential; manual roll transport = back injury
Press operator at console: sustained standing + forward lean = back, neck strain
Die cutter makeready: precision work with sharp tools — awkward postures
Large-format inkjet: sustained standing and reaching — shoulder and back

B8 – Occupational Health Hazards

Toluene encephalopathy: chronic occupational exposure in gravure printers — memory impairment, personality changes, cerebellar dysfunction; irreversible
Occupational dermatitis: UV ink photoinitiators, solvent degreasing of skin
Colour vision impairment: solvent neurological effects affect colour discrimination — relevant to press operators matching colour
NIHL: web press noise 88–95 dB, folder-gluer 85–90 dB
UV eye damage: cataracts and photokeratitis from UV lamp exposure without eye protection

🛡️

Section C

Practical Safety Measures

▼

Hazard	Possible Accident	Preventive Measures	Engineering Controls	Administrative Controls	PPE
Primary Process Hazard	Injury / fatality from core process	Follow SOP; no bypass of safety systems; pre-shift hazard briefing	Interlocks, relief valves, emergency shutdowns, containment	Permit to Work; LOTO; training; shift handover protocol	Full face shield, chemical resistant suit, SCBA where toxic
Mechanical – Rotating Parts	Entanglement, amputation, crush	All guards in place before start; LOTO for maintenance	Fixed guards, interlocked enclosures, E-stop pull cords	No loose clothing / jewellery policy; PTW for maintenance	Close-fitting overalls, safety shoes, cut-resistant gloves
Electrical	Shock, arc flash, fire	Electrical PTW; LOTO; no solo HT work	ELCB 30 mA; FLP in hazardous zones; IP rating for environment	Licensed electricians; SLD posted; arc flash analysis	Insulated gloves; arc flash PPE (Cat 2 min) for HT work
Fire / Explosion	Burns, blast injury, fatality	Hot work permit; gas testing; no smoking; housekeeping	Gas/vapour/dust detectors; auto-isolation; sprinklers/deluge	Hot work permit; fire watch; supervisor approval	Fire-retardant coveralls; SCBA for fire team
Chemical Exposure	Burns, inhalation, systemic toxicity	SDS at point of use; substitution where possible; LEV at source	Enclosed process; LEV; emergency deluge shower + eyewash	Exposure monitoring; medical surveillance; job rotation	Chemical resistant gloves/apron; face shield; respirator (type per SDS)
Toxic Release	Poisoning, asphyxiation, fatality	Fixed detector + alarm; emergency isolation; OSEP	Detector with auto-shutoff; scrubber; bunding	Emergency drill; buddy system; shelter-in-place protocol	SCBA (not cartridge) for IDLH atmospheres; full chemical suit
Noise	NIHL (permanent)	Noise map; audiometry baseline + annual	Acoustic enclosures; anti-vibration mounts; isolated control rooms	Noise zone boards; exposure time limits; hearing conservation programme	Ear muffs (SNR 28+) or fitted ear plugs in >85 dB zones
Heat Stress	Heat exhaustion, heat stroke	WBGT monitoring; ORS supply; acclimatisation	Roof insulation; cooling fans; spot cooling	Work-rest schedule; buddy system; summer protocol	Light cotton uniform; cooling towels; hydration vest
Ergonomic – Manual Handling	Back injury, MSD, hernia	Mechanical aids; team lift for >25 kg; training	Trolleys, hoists, height-adjustable workstations	Weight limits posted; rest breaks; job rotation	Lumbar support belt for sustained lifting
Falls – Slips/Trips	Fracture, head injury, fatality (from height)	Good housekeeping; anti-slip flooring; lighting >200 lux	Edge protection; safety nets; PFAS for >2 m work	Fall plan for elevated work; daily inspection of work platforms	Safety helmet; safety harness (full body) for height work; non-slip footwear

🔥

Section D

Fire Safety

▼

⛔ Industry-Specific Fire RiskTOLUENE in gravure printing: India's printing industry is one of the largest occupational toluene exposure sectors. Biological monitoring (urinary hippuric acid or ortho-cresol) annually for all gravure press operators is mandatory under good occupational health practice and is moving toward legal requirement. Reproductive toxicity makes this a priority for women workers.

Fire Load by Area

Area	Primary Fuel	Risk Level
Gravure / Flexo Press Room	Toluene / Ethyl acetate vapour	VERY HIGH – Zone 2; explosion risk
Solvent Storage	Class IB–IC solvents	VERY HIGH
Finished Goods Warehouse	Cartons, films, rolls	HIGH – fast-spreading fire
Raw Material Store	Paper rolls, film rolls, board	HIGH
UV Ink / Varnish Area	Oxidising photoinitiators + UV energy	MEDIUM–HIGH

Sources of Ignition

Static discharge on plastic film surface in solvent atmosphere
Non-FLP equipment in gravure press room
Spontaneous ignition of solvent-soaked rags
Hot melt glue overheating
UV lamp malfunction — excess heat in UV ink

Fire Detection Systems

LEL detector in gravure press room: 10% LEL alarm, 25% LEL press shutdown and ventilation max
LEL detector in flexo web dryer (integrated with dryer control)
Smoke/heat: offset press room, store, finishing
UV sensor on UV lamp: over-temperature alarm
Manual call points at all exits

Fire Protection Systems

Area	Protection System	Standard
Gravure Press Room	Zone 2 classification throughout; LEL monitor + automatic press stop on LEL breach; LEV (minimum 10 air changes/hr); explosion-proof fans	NFPA 86 / IS:1641
Flexo Web Dryer	Integral LEL monitor; auto fresh air purge; explosion relief panel on dryer enclosure	EN 1539 / NFPA 86
Solvent Store	Bunded, ventilated, FLP lighting; AFFF portable extinguisher; earth bonding	NFPA 30
General Press Room	DCP 6 kg per press; CO₂ at UV lamp panel; fire blankets	IS:15683
Solvent Recovery Unit	FLP electrical; explosion relief; CO₂ on distillation still	Zone 1 classified

Emergency Evacuation

Travel distance to nearest exit: ≤30 m on production floor (dead-end: ≤15 m)
Exit corridors: minimum 1.2 m wide; fire-rated doors (60 min) on hazardous areas
Emergency lighting: 3-hour backup; green exit signage every 15 m
Assembly point: minimum 2 per site; marked with green "A" board; illuminated at night
Evacuation warden: 1 per 50 workers per floor; high-visibility jacket
Evacuation alarm: distinct pattern; audible throughout plant including noisy areas

Fire Drill Protocol

Frequency: Minimum twice per year under Factories Act / Gujarat OSHWC Rules 2025
At least one drill unannounced; all shifts to participate over the year
Drill record in Fire Register; debrief within 24 hours; corrective actions with target date
Internal fire team (6–10 trained members): annual refresher training with GFES

⚡

Section E

Electrical Safety

▼

LT Systems (415 V)

MCC segregated, labelled, accessible only to licensed electricians
ELCB/RCCB: 30 mA on all socket outlets and portable equipment
IP rating appropriate for area classification (IP54 general; IP65 wash-down; FLP for Zone 1/2)
Motor rewinding: comply with IS:12615; 2 rewinds max then replace
Monthly thermographic scan of MCCs and critical panels — hot spots actioned within 48 hours

HT Systems (11 kV / 33 kV)

Electrical Permit to Work (PTW) system mandatory; licensed HT operator
Minimum approach distance: 1.2 m (11 kV); 3.5 m (33 kV) — marked on floor
SF6/VCB switchgear: annual maintenance; arc-flash study every 5 years
Single-line diagram (SLD) displayed in HT room; updated after every modification

Transformers

Oil temperature alarm (95°C) / trip (105°C); Buchholz relay — tested annually
Oil containment pit: 110% of transformer oil volume; oil-water separator
BDV oil test annually; replace oil if <30 kV; dissolved gas analysis (DGA) for early fault detection

DG Sets

AMF panel tested quarterly; anti-islanding / reverse-power relay fitted
HSD storage secondary containment; earthing; vent pipe 3 m high away from ignition sources
Exhaust: route away from air intakes; acoustic enclosure for noise control

Earthing and Static Electricity

Earth resistance: <1 Ω (HT); <5 Ω (LT) — biannual measurement (wet and dry season)
Bonding and earthing of all process vessels, pipelines, tankers before product transfer
Anti-static flooring in flammable/explosive areas; anti-static wrist straps for sensitive work
Static-dissipative footwear in Zone 1/2 — volume resistivity 10⁵–10⁸ Ω.cm

Electrical Maintenance Safety

LOTO: individual lock, personal key; multi-hasp for multi-energy isolation
Insulated tools rated 1000 V (LT); 10 kV (HT); test before touch — mandatory
Night/holiday maintenance: buddy system; no solo electrical work on any system
Annual electrical installation inspection by Licensed Electrical Supervisor / CEI

⚙️

Section F

Mechanical Safety

▼

ℹ Section 21, Factories Act 1948Every dangerous part of machinery must be securely fenced. Gujarat OSHWC Rules 2025 strengthen this requirement. No production pressure justifies removing a guard.

Machine Guarding

Hazard Zone	Guard Type	Standard	Verification Frequency
All rotating parts (shafts, couplings, pulleys)	Fixed metal enclosure guard	IS:1870 / IS:10973	Monthly
Nip points (rollers, presses)	Nip guard bar + interlock	OEM / IS:10973	Daily pre-start
Cutting / shearing zones	Fixed guard; two-hand control for manual feed	IS:10973	Shift in-charge
Access covers / service panels	Interlocked cover (micro-switch hardwired)	IEC 60204-1	Monthly test
High-speed discs / wheels	Reinforced enclosure; burst containment	IS:1991 (grinding)	Pre-use inspection

Interlocking Systems

All safety-critical covers: hardwired micro-switch interlock — cover open = machine stops immediately
Interlock defeat / bypass: any bypass requires written PTW, safety officer approval, and immediate reinstatement after maintenance
Monthly interlock function test: documented in Maintenance Safety Register

Emergency Stop (E-Stop) Systems

Red mushroom-head E-stop on each machine — direct hardwired, fail-safe, requires manual reset
E-stop pull cords along conveyor/line lengths — anyone can activate from anywhere
Section master E-stop at section entry — for emergency mass shutdown
E-stop test: monthly; result recorded; any failure rectified same day

LOTO — Lockout / Tagout

Notify affected workers; identify all energy sources (electrical, pneumatic, hydraulic, stored kinetic/gravitational)
Shut down using normal procedure; isolate all energy sources
Apply personal padlock + tag — one lock per person; multi-hasp if multiple workers
Verify zero energy: attempt restart; bleed pneumatics; check spring/gravity energy
Perform work; on completion: clear tools, restore guards, remove lock/tag, notify, restore energy, verify safe operation

Preventive Maintenance Programme

Activity	Frequency	Responsible	Record
Bearing lubrication on all process equipment	Weekly / per OEM schedule	Mechanical fitter	Lubrication log
Guard integrity inspection — all sections	Monthly	Safety Officer	Safety inspection register
E-stop and interlock test	Monthly	Maintenance + Safety	Test register
Belt, coupling, and chain inspection	Monthly	Maintenance supervisor	PM register
Pressure vessel / heat exchanger inspection	Per IBR / OEM (typically annual)	Competent Person	Inspection certificate to DISH
Annual plant safety audit	Annually	Empanelled OHS Auditor	Report to DISH — Gujarat OHS Audit Rules 2025

🏗️

Section G

Material Handling Safety

▼

Forklifts / Battery / LPG Trucks

Licensed operator; medical fitness certificate; refresher every 3 years
Daily pre-use checklist: tyres, brakes, horn, mast, forks, warning light
Pedestrian-forklift segregation: painted lanes (yellow); raised pedestrian walkways in high-traffic areas
Speed limit: 5 km/h indoor; 10 km/h outdoor; warning light (blue) visible 360°
Parking: forks lowered, engine off, key removed, hand brake on, level surface

EOT Cranes and Hoists

Annual load test at 125% SWL by Competent Person — certificate displayed on crane
Pre-use inspection: hooks, chains/wire rope, limit switches, brakes — daily log
Exclusion zone under any suspended load; never allow persons under load
Trained rigger for slinging; sling angle ≤60° to vertical; SWL derated per angle

Conveyors

Nip point guards at drive/tail/return rollers — all in place before start
Emergency stop pull cord along full conveyor length; tested monthly
No manual clearing while running; maintenance only under LOTO

Manual Handling

Task	Risk	Control
Bag lifting (25–50 kg)	Back injury, hernia	Mechanical bag tipper; two-person lift for >25 kg; lumbar belt
Drum handling (200 L)	Crush, chemical spill, back injury	Drum trolley; drum tipper; never manual rolling on wet floor
Pallet stacking	Back, shoulder injury	Pallet jack or forklift; max manual stack height 1.5 m
Overhead work	Shoulder, neck MSDs; fall	Adjustable platform or mobile scaffold; no overhead work from ladder for sustained tasks

⚠ Legal LimitFactories Act Sec. 34: No woman to carry/lift weight likely to cause injury. Gujarat OSHWC Rules 2025: max 30 kg for adult male worker without mechanical aid. Enforce strictly for contract and migrant workers.

🫁

Section H

Occupational Health

▼

Noise

Action level 80 dB(A) — hearing conservation programme; exposure limit 85 dB(A) 8-hr TWA with PPE
Annual audiometry for all workers exposed >80 dB(A); baseline at joining; records for employment duration
Noise zone boards (Green/Amber/Red) based on annual noise survey
Engineering controls first: acoustic enclosures, anti-vibration mounts, isolated control rooms

Heat Stress

WBGT monitoring; action thresholds: 28°C (enhanced monitoring), 32°C (reduced workload), 35°C (15 min rest/hr)
ORS at each drinking water point — April to June mandatory
New worker acclimatisation: 50% workload increasing to 100% over 7–14 days
Buddy system in hot areas; trained supervisors for heat stress recognition

Dust Exposure

Dust Type	OEL	Control Priority	Health Effect
Silica (quartz) respirable	0.025 mg/m³ (ACGIH TLV)	HIGHEST — substitution first	Silicosis (irreversible); Lung cancer
General inorganic dust (respirable)	3 mg/m³	High — LEV and RPE	Pneumoconiosis
Organic dusts (flour, cotton)	0.5–1 mg/m³	High — LEV and RPE	Occupational asthma, byssinosis
Metal fumes (iron, manganese)	Mn: 0.02 mg/m³; Fe: 5 mg/m³	High — extraction at source	Metal fume fever; Parkinsonism (Mn)

Chemical Exposure Monitoring

Personal air sampling for chemicals with OEL — minimum annually; after any process change
Biological monitoring where required (benzene: urinary MuMu; lead: blood lead; Mn: blood/urine Mn)
SDS reviewed and acted upon; exposure register maintained

Ventilation

General dilution: minimum 6 air changes/hour in enclosed production areas
Local exhaust ventilation (LEV): capture velocity ≥0.5 m/s at source; quarterly performance check
Make-up air: filtered (G4 min); temperate for worker comfort

Medical Surveillance Programme

Test	Target Group	Frequency
Pre-employment medical (Form — Schedule XXV)	All workers	At joining
Spirometry (FVC, FEV₁)	Dust/fume/vapour exposed	Annual
Audiometry (PTA)	Noise-exposed (>80 dB)	Annual
Chest X-ray (ILO classification)	Silica, asbestos, hard metal exposed	Annual (or per legal requirement)
Liver function tests (LFT)	Solvent, chemical workers	Annual
Blood count + differential	Benzene, heavy metal exposed	Annual; 6-monthly if borderline
Skin and eye examination	Chemical handling workers	Annual

⚖️

Section I

Legal Compliance — Applicable Indian Laws

▼

Legislation	Key Provisions	Authority	Applicable?
Factories Act 1948	Sec. 11–20 health; Sec. 21–40 safety (guarding, hoists); Sec. 87 hazardous processes; Schedule diseases; Sec. 88 accident reporting; Schedule XXV medical exam	DISH, Gujarat	✔ Yes
OSH Code 2020 + Gujarat OSHWC Rules 2025	Ch.IV employer duties; Ch.V OHS; Safety Officer threshold; Annual OHS Audit; Competent Person framework; OSH Committee; welfare provisions	DISH, Gujarat	✔ Yes
OSH Central Rules 2026 (G.S.R. 345(E), 8 May 2026)	Updated competent person age limits; national OSH portal reporting; auditor empanelment; revised hazardous process schedules	DGFASLI / DISH	✔ Yes (New)
MSIHC Rules 1989 (as amended)	Threshold quantity triggers for Schedule 1/2/3 chemicals; OSEP; mock drill; MSDS requirement; DISH/GIDC notification	DISH Gujarat + SPCB	⚠ If threshold crossed
PESO (Explosives Act / Gas Cylinder Rules / Petroleum Rules)	Compressed gas cylinder registration; petroleum storage licence; pressure vessel registration	PESO (Govt. of India)	✔ Yes
Indian Boilers Act 1923 / IBR 1950	Registration and annual inspection of boilers and pressure vessels >22.5 L above 1 kg/cm²	Boiler Inspectorate, Gujarat	✔ Where applicable
Gujarat Fire Prevention & Life Safety Measures Act	Fire NOC for new/altered construction; annual renewal for high fire load or large occupancy	State Fire Authority / GDMA	✔ Yes
Gujarat PCB (Air Act / Water Act / E-Waste Rules)	Consent to Operate; stack emission compliance; ETP/STP for trade effluent; GPCB annual return; hazardous waste manifest (Form 3)	GPCB	✔ Yes
Electricity Act 2003 / CEA Regulations	Electrical installation safety; periodic inspection; HT/captive generation licence	GERC / Electrical Inspectorate	✔ Yes
Gujarat Factories (OHS Audit) Rules 2025	Annual OHS Audit by DISH-empanelled auditor; report submission; compliance within 90 days	DISH, Gujarat	✔ Yes (New 2025)
ESI Act / Workmen's Compensation Act	ESIC registration; compensation for occupational diseases; employer's liability for industrial accidents	ESIC / Labour Commissioner	✔ Yes

⚠ New Regulations (2025–2026)OSH Central Rules 2026 (G.S.R. 345(E), 8 May 2026) and Gujarat Factories (OHS Audit) Rules 2025 are NOW in force. Ensure Safety Officer credentials are updated on the DISH portal and annual OHS audit is budgeted.

✅

Section J

Safety Audit Checklist

▼

#	Audit Item	Legal Requirement	Status	Remarks
1	Factory licence (Form 4) displayed and current	Factories Act Sec. 6	✔ Compliant	Verify renewal date annually
2	Safety Officer appointed and registered with DISH	Gujarat OSHWC Rule 2025	✔ Compliant	Certificate on file; OSH Code threshold met
3	OSH Committee constituted (workers + management reps)	OSH Code 2020 Sec. 43	⚠ Review	Verify worker rep election minutes
4	Annual OHS Audit by DISH-empanelled auditor	Gujarat OHS Audit Rules 2025	⚠ Due	Schedule within current FY
5	All machine guards intact; interlocks functional	Factories Act Sec. 21	✔ Compliant	Monthly inspection register maintained
6	LOTO procedure documented; workers trained	Gujarat OSHWC Rules	⚠ Partial	3rd shift training pending; schedule within 30 days
7	Hazardous area electrical: FLP/IS equipment in Zone 1/2	CEA Rules / IS:5571	✔ Compliant	Zone drawing updated
8	Fire extinguishers: valid, serviced, accessible	Fire NOC conditions; IS:15683	✔ Compliant	Annual service certificate on record
9	Gas / toxic vapour detectors installed and calibrated	MSIHC Rules / industry standard	⚠ Partial	Calibration of 3 detectors overdue; rectify immediately
10	Emergency deluge showers and eyewash stations	MSIHC / factory good practice	✔ Compliant	Tested weekly (flow test); within 10 seconds of hazard area
11	ELCB (30 mA) on all socket outlets	CEA Rules 2010	✔ Compliant	Tested quarterly
12	Earthing resistance measured biannually	CEA Rules	✔ Compliant	Last test result: <1 Ω (HT); <5 Ω (LT)
13	Medical surveillance records (spirometry, audiometry, blood tests)	Factories Act Schedule XXV	⚠ Partial	Annual round not completed for new joiners
14	SDS for all chemicals at point of use (Gujarati/Hindi + English)	MSIHC Rules / OSH Code	✔ Compliant	Reviewed against current inventory
15	Boiler/pressure vessel IBR certificate current	Indian Boilers Act 1923	⚠ Check	Confirm renewal with Boiler Inspectorate
16	PPE issued, usage monitored, records maintained	Gujarat OSHWC Rules 2025	✔ Compliant	Issue register verified; usage monitoring done by supervisors
17	Emergency evacuation drill — 2× per year	Gujarat OSHWC Rules 2025	⚠ Partial	1st drill done; 2nd due before year-end
18	Accident / incident register (Form 11 equivalent)	Factories Act Sec. 88	✔ Compliant	All injuries >48 hours reported to DISH
19	Contractor safety induction and permit system	OSH Code 2020 Sec. 49	⚠ Partial	Hot work permit system in use; confined space PTW not formalised
20	On-Site Emergency Plan (OSEP) reviewed annually	MSIHC Rules (if applicable)	✔ Compliant	OSEP reviewed Jan 2026; copy with DISH and District Authority

🎓

Section K

Training Matrix

▼

Training Topic	Workers	Supervisors	Engineers	Contractors	Managers	Frequency
Safety Induction (General)	✔	✔	✔	✔	✔	At joining
Machine Guarding & Hazard Awareness	✔	✔	✔	~	—	Annual
LOTO (Lockout / Tagout)	✔	✔	✔	✔	—	Annual + at PTW issuance
Fire Safety & Extinguisher Use	✔	✔	✔	✔	✔	6-Monthly
Chemical Safety & SDS Awareness	✔	✔	✔	~	~	Annual
PPE Selection and Correct Use	✔	✔	✔	✔	—	Annual
Permit to Work System (PTW)	~	✔	✔	✔	~	Annual
Electrical Safety	—	~	✔	✔	~	Annual
First Aid & Emergency Response	~	✔	✔	~	✔	3-Yearly cert + Annual drill
Manual Handling & Ergonomics	✔	✔	—	✔	—	Annual
Noise & Hearing Conservation	✔	✔	~	~	—	Annual
Heat Stress Prevention	✔	✔	~	✔	~	Before summer (March)
Incident Investigation & Reporting	—	✔	✔	—	✔	Annual
Confined Space Entry	~	✔	✔	✔	—	Annual
Legal Compliance (Factories Act / OSH Code)	—	~	✔	—	✔	Annual (or on regulatory update)

✔ Mandatory | ~ Awareness level | — Not required for this role

🚨

Section L

Emergency Preparedness

▼

Emergency Response Organisation

Role	Designation	Responsibility
Incident Commander	Works Manager / GM	Overall command; liaison with external agencies; media and regulatory communication
Safety Coordinator	Safety Officer	Damage assessment; DISH notification within 4 hours (fatal/major); investigation lead
Fire Attack Team Leader	Senior Supervisor / Engineer	Internal fire team (6–10 trained); liaison with GFES on arrival
Evacuation Warden	Shift In-charge (each section)	Floor sweep; headcount at assembly point; report all-clear to commander
First Aid Coordinator	Trained First Aider (1:50 ratio)	First aid; triage; ambulance coordination; casualty list
Utilities Controller	Chief Electrical / Maintenance Engineer	Emergency isolation of power, steam, gas; safe shutdown of process
Security Controller	Security In-charge	Gate control for emergency vehicles; restrict unauthorised entry

Mock Drill Programme

Fire Drill: Minimum 2× per year; all shifts; ≥1 unannounced; record in drill register
Medical Emergency: 1× per year; mass casualty simulation; hospital alert tested
Toxic Gas / Chemical Spill: 1× per year (MSIHC units); includes evacuation and decontamination
Power Failure / Blackout: Quarterly; DG startup; emergency lighting verification
Written debrief within 24 hours; corrective actions with owner and due date

Assembly Points

Minimum 2 assembly points per site (primary + alternate) — away from gate, clear of emergency vehicle routes
Green "ASSEMBLY POINT – A" board (600×900 mm minimum); illuminated at night; GPS coordinates known to fire brigade
100% headcount mandatory; reported to Incident Commander within 10 minutes of alarm activation

Mutual Aid and External Coordination

Enrol in GIDC / ESIA Mutual Aid Group (MAG) for industrial estates
Emergency contact list: GFES (nearest station), DISH inspector, hospital with burns unit / ICU, DM's office, GPCB
MOU with ≥2 nearby factories for emergency resource sharing (fire pump, ambulance, personnel)
Off-site emergency plan coordination with DDMA (District Disaster Management Authority) for MSIHC units

On-Site Emergency Plan (OSEP)

Mandatory for MSIHC threshold factories; recommended for all units with >50 workers
Covers: fire, toxic release, explosion, medical mass casualty, power failure, civil unrest
OSEP reviewed annually and after every actual emergency or drill with significant findings
Copies: Works Manager, Safety Officer, Security, DISH Office (MSIHC), District Emergency Authority

🏆

Section M

Best Practices in Leading Indian Industries

▼

Zero Tolerance for Guard Removal: Disciplinary action up to termination for guard removal under production pressure — integrated into HR policy and employment contract
Behaviour-Based Safety (BBS) Programme: Structured peer observation with trained coaches from the workforce; documented 30–50% reduction in unsafe acts in Indian industry adopters
Digital PTW and LOTO System: QR-code-based digital Permit to Work; real-time isolation tracking; prevents multi-shift overlap errors; audit trail for DISH inspection
Near-Miss Reporting Culture: Top performers achieve >200 near-miss reports per 1000 workers per year; zero-blame policy; every report acknowledged within 24 hours; weekly trend review
Safety Observation Round (SOR): Every supervisor submits ≥2 safety observations per shift via mobile app; weekly management review; top safety observer recognised monthly
Monthly Safety Incentive: Team/section with zero LTI and highest near-miss reports gets recognition (certificate + small reward) — reinforces positive safety behaviour without masking incidents
Contractor Safety Passport: All contractors undergo site induction + hazard briefing; safety passport card required for site entry; records digitised and verified at gate
Thermographic Electrical Survey: Annual IR thermography of all MCCs, panels, and critical connections — hot spots identified and corrected before fire or failure occurs
Annual Safety Day (4 March — National Safety Day): Safety quiz, banner competition, skill demonstration, management commitment event — builds safety culture across all levels
Visual Safety Factory: Colour-coded hazard zones; safety rules in Gujarati, Hindi, and Tamil (for migrant workers); pictorial boards replacing text-only signs
Management Safety Walk: Senior management (MD/Director) unannounced safety walkthrough quarterly; findings actioned within 2 weeks — signals top-level commitment that cascades through all levels
Process Safety Reviews (HAZOP/FMEA): Leading chemical and pharma plants — annual HAZOP for critical processes; FMEA for critical equipment; findings tracked to closure

📊

Section N

Safety Performance Indicators

▼

KPI	Formula	Unit	Indian Industry Benchmark	World-Class Target
Accident Frequency Rate (AFR)	Reportable accidents × 1,000,000 ÷ Man-hours worked	Accidents / million man-hours	8–20 (Indian manufacturing)	<3
Accident Severity Rate (ASR)	Man-days lost × 1,000,000 ÷ Man-hours worked	Days lost / million man-hours	200–600	<100
LTIFR (Lost Time Injury Frequency Rate)	LTIs × 1,000,000 ÷ Man-hours worked	LTIs / million man-hours	5–15	<1.5
Near Miss Rate	Near misses reported × 1,000 ÷ Man-hours worked	Per 1000 worker-hours	0.5–2 (heavily under-reported)	>5 (high reporting = good culture)
PPE Compliance Rate	Workers correctly wearing PPE ÷ Total observed × 100	%	55–75%	>95%
Training Compliance Rate	Workers trained on schedule ÷ Target × 100	%	50–70%	>95%
Unsafe Act / Condition Rate	Unsafe observations ÷ Total safety observations × 100	%	25–40%	<5%
Safety Observation Rate (SOR)	Observations submitted ÷ Supervisors × month	Obs/supervisor/month	2–5	>10

Near Miss Reporting Protocol

Simple form (paper or mobile): 5 fields max; option for anonymous reporting
Report within same shift; zero disciplinary action for reporter — absolute policy, communicated in writing
Weekly review in safety meeting; each near miss gets corrective action with owner and due date
Monthly trend analysis: repeat locations and hazard types → focus resources on hotspots
Near-miss:LTI ratio target: 300:1 (high-reporting culture) vs. <50:1 (under-reporting — dangerous)

🎯

Section O

Conclusion – Critical Safety Actions

▼

✅ The Safety EquationIn every manufacturing facility, safety is not a cost — it is a productivity multiplier and a legal obligation. One serious accident can result in permanent disability, factory closure, criminal prosecution under OSH Code 2020, and irreparable reputational damage. Proactive safety management is the only rational business decision.

Top 10 Non-Negotiable Safety Actions for This Industry

Gravure/Flexo Zone 2 compliance: LEL monitor at press and dryer; continuous ventilation; no non-FLP equipment in press room — solvent press fires and explosions have occurred in Indian printing units
Toluene substitution or LEV: move from toluene to ethyl acetate or water-based gravure inks — if toluene retained, biological monitoring (urinary hippuric acid) mandatory annually for all exposed workers
Press nip guarding: all impression/transfer/anvil nips guarded or covered with trip bar; emergency stop at all operating positions on the press — high-speed press nips are amputating
Die cutter safety: two-hand control or light curtain on platen die cutter; no manual reach-in during cycling — die cutter injuries are under-reported but severe
UV lamp safety: face shield for UV; gloves for UV ink; ozone extraction above UV lamps; lamp enclosure in good condition; UV power-off before any access to lamp area
Static management on film presses: tinsel earth strips, ionising bars, bonded press frame — static shock and fire risk on plastic film substrates running at 300+ m/min
Solvent store earthing and ventilation: solvent drums and IBCs earthed and bonded; explosion-proof ventilation; no ignition sources; flashpoint data posted
Hot melt glue burns: insulated application gun, drip trays, heat-resistant gloves; glue application temperature control; burn is the most common acute injury in folding-gluing operations
Roll handling: roll loading crane or roll stand for all rolls >50 kg; fork-mounted roll clamp for large rolls; worker foot-protection from roll fall
Medical surveillance: annual spirometry for press operators (solvent asthma, respiratory irritation); colour vision test for press operators; neurobehavioural screen for gravure workers with >5 years exposure

📞 For Safety Compliance Consulting, Training & Audits — Gujarat This safety encyclopedia is produced by Udyogmitra Associates, Ahmedabad — specialists in OSH Code 2020, Gujarat OSHWC Rules 2025, Gujarat Factories (OHS Audit) Rules 2025, and factory safety compliance. Contact us for factory safety audits, Safety Officer training, DISH compliance representation, and customised safety training programmes for your workforce.